You must be logged in and verified to contact the designer.
This Kit is based on photographs of the small Mackenzie-Holland signal cabin that once existes at Chirk station.
This print contains the base plate which is best printed in WSF and painted to match your baseboard colour. The open side was to allow a PEC0 PL-11, surface mounted point motor on my layout to protude. This could be filled by a strip of suitable plasticard when permanently fixing to a baseboard if desired.
It may be necessary to clean out the two slots with a needle file before fitting the stairs. If permanently fixed to a baseboard, the signal box base and stairs can be fitted without gluing to allow for easy removal.
The Part included is:
1 Base Plate
In addition to paint and glasing material you will need the following prints to complete:
Chirk Signal Cabin Part 2, Printed in WSF (Main Brickwork)
Chirk Signal Cabin Part 2a, Printed in WSF (Optional Blanking Plate) Chirk Signal Cabin 3 & 4, Printed in WSF (Chimney Breast and Chimney)
Chirk Signal Cabin 3 & 4, Printed in WSF (Chimney Breast and Chimney)
Chirk Signal Cabin Part 5, Printed in WSF (Roof)
Chirk Signal Cabin Parts 6-10, Printed in FUD (Blank Nameboard, Balcony and Stairs, Roof Vent,
Chirk Signal Cabin Part 11, Printed in FUD (Upper Floor Framing and Door)
Chirk Signal Cabin Parts 12-19, Printed in FUD (windows and planking for the upper storey)