White Natural Versatile Plastic
Tamiya Bruiser / HG P407 12mm Hex Adapter rear
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$8.63
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
Here is my 12mm hex wheel adapter for the lengendary TAMIYA Bruiser (also Mountaineer) and the HG P407 clone.
It is designed as a breaking drum for the rear axle :-)
For use this adapter, you just need to drill a little hole (Ø 2mm) in the axle at the position where the hole is in the hex of the adapter. Than you put a pin (Ø 2mm and 11mm long) through the hex and the axle - READY.
Now you can use almost every rim with 12mm hex ;-)
You can use the original wheel nut to tighten the rim by using my nut-adapters (see my other products)!
It is designed as a breaking drum for the rear axle :-)
For use this adapter, you just need to drill a little hole (Ø 2mm) in the axle at the position where the hole is in the hex of the adapter. Than you put a pin (Ø 2mm and 11mm long) through the hex and the axle - READY.
Now you can use almost every rim with 12mm hex ;-)
You can use the original wheel nut to tighten the rim by using my nut-adapters (see my other products)!
Details
What's in the box:
2x12mmAdapterHeck
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
