You must be logged in and verified to contact the designer.
1/35 Scale Royal Navy Mushroom Vents Various Sizes Small Set x30, suitable for most WW2 Royal Navy Vessels. Accurately sized Mushroom Vents with Hex Nuts on roof and Vent with grills on side. See My Shop for 1/35 Royal Navy Large Mushroom Vent Set.
6x 18" Vents
6x 18" Tall Style Vents
6x 16" Vents
6x 16" Tall Style Vents
6x 14" Tall Style Vents
Cleaning Information Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.
Let your parts sit in direct sunlight for a few hours to fully cure the resin. Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics. Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts. Please take a look at my other items.