1/700 Scale Norinco VT4 MBT3000 Main Battle Tanks.
Contains 10 highly detailed tanks with accurate Track detail
Contains:- 10x Norinco VT4 MBT3000 Main Battle Tank
VT4 MBT3000 Main Battle Tank
TThe
VT4 main battle tank (
Chinese: VT-4主战坦克 ), also known as the
MBT3000, is a
Chinese third generation main battle tank built by
Norinco for overseas export. It is an upgraded variant of the
MBT2000 (
VT-1) and the latest tank model from the
Type 90-II tank family. The VT-4 has a 125mm smoothbore cannon capable of firing
APFSDS,
HESH,
HEAT and HE rounds and guided missiles. There is also a
remote weapon station on the turret armed with a 12.7 mm heavy machine gun. The fire control system has
hunter-killer capabilities, laser rangefinder, panoramic sight, and a third generation thermal imaging system.
The tank appears to have
composite and
explosive reactive armor. The turret front has wedge shaped armor and the hull sides have armored sideskirts. The tank is equipped with an
active protection system designated
GL5, defensive grenade launchers, and a
laser warning device. The vehicle also has an
IFF system, NBC protection, explosion suppression system, fire extinguishing system, and air conditioning. According to Norinco, the VT-4 uses a locally produced 1,300 hp diesel engine with
torsion bar suspension and an integrated
hydraulic transmission system. Steering and acceleration is handled by a steering wheel and
automatic gear transmission.
The tank is also integrated with digital communications systems for tank-tank communication and communication between commanders.
Cleaning Information
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.
Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.
Painting tips and preparation