You must be logged in and verified to contact the designer.
These little landing gear are for use with the Saucer Section Hull of the Small Kit of the Enterprise C.
Mounted about half way up the lower dome in 4 places equally spaced between the arc of each weapons array. The Gear doors closely match the
Dome Geometry so the gear well can attach to the hull. Just a small square hole in the hull is required to set
the gear well into. Adhesive can be placed on the back of the door to set the gear in place.
Painting the gear is best accomplished after giving the gear 3 coats of Krylon clear coat or Triple thick crystal clear glaze.
Creates a great look for a Saucer section which had to make emergency landfall.