This is a set of replacement parts for Transformers Armada Megatron. The 2 parts replace Megatron's head horns/antlers. These parts do not interfere with the transformation. You can use the horn pincher gimmick with these parts.
These parts are connected. You will need to separate them and trim off excess plastic with a hobby knife or plastic cutters.
To install, insert into the side of Megatron's head where the original horns were installed. You will need to make sure there is nothing blocking the hole where the horns inert into. No need to remove the screw from the back of the head. Becasue of the design of the horn attachment, you need 2 identical parts. You do not need 2 mirrored parts.
This is intended for adult collectors. This is not designed for rough play by children.
This was tested with my home printer, printed in PLA plastic. When fitting the part press firmly and evenly. Depending on the plastic you choose, sanding or polish may be needed to fine tune the fit.
This has been successfully printed in Shapeways Natural Versatile Plastic, Premium Versatile Plastic, Processed Versatile Plastic and PA12.
For Replacement Missiles for Armada Megatron/Galvatron, Please see my other product here:
https://www.shapeways.com/product/DLKQL4GE3/tf-armada-tank-replacement-missile-set