You must be logged in and verified to contact the designer.
IMPORTANT! Your mast must have a Track depth of 19mm and feed slot of 6" x 1/2".
Some C25 have a 25mm TD. Search for TD=25mm
Catalina 22, Capri & Sport normally have a smaller or larger track depth and will need a different gate insert found on this Shapeways Marketplace. Search "mastgates catalina"
Make color selection before clicking the order button.
Select ORANGE for best viewing or BLACK for best UV protection.
Review at StingySailor: https://stingysailor.com/2018/03/03/product-review-mastgates-sail-track-gates-2/
Will bridge Feed Slot cut out of 6" long by 1/2" wide and must have a track depth of 3/4" (19mm).
The attached youtube video link is of an earlier version insert.
The insert sleeve is symmetrical, with two protruding nipple pins.
Center the Insert within the feed slot. Use the nipple pinhole as a drilling guide for a #55 bit to mark aluminum for a pilot hole. Remove the insert to finish drilling holes with a 3/16" drill bit and remove any burrs.
Nipple pins will key into the holes to prevent unintentional sliding of the insert.
For free 2-year warranty and support, Please register your purchase:
Name, email, part number ordered, sailboat's year, make & model
I will provide you with a reference number to track your purchase and emails.