Hilux Front Axle Bottom Leaf Attacment
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$36.65
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
This is a custom design front axle in the style of toyota hilux.
It is competable with RC4WD TF2 chassis with the leaf springs attached on the bottom of the axle.
The axle are narrow to fit the wheels under the body like tamiya hilux.
This are the axle housing only and will need modified vaterra ascender front cvd shafts.
some fabrication to the shafts will be needed.
Also needed to complete the axle are the following:
https://www.shapeways.com/product/3V2VYRBCX/large-bevel-gear-steel-offset?optionId=62285614
https://www.shapeways.com/product/4DW7TSQ65/small-bevel-gear-steel-with-shaft-grub?optionId=62285013
7x 1150 bearings
1x 850 bearing
3x4 screws
2x6 screws.
It is competable with RC4WD TF2 chassis with the leaf springs attached on the bottom of the axle.
The axle are narrow to fit the wheels under the body like tamiya hilux.
This are the axle housing only and will need modified vaterra ascender front cvd shafts.
some fabrication to the shafts will be needed.
Also needed to complete the axle are the following:
https://www.shapeways.com/product/3V2VYRBCX/large-bevel-gear-steel-offset?optionId=62285614
https://www.shapeways.com/product/4DW7TSQ65/small-bevel-gear-steel-with-shaft-grub?optionId=62285013
7x 1150 bearings
1x 850 bearing
3x4 screws
2x6 screws.
Details
What's in the box:
Hilux Front Axle Vaterra Internals Lower
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
