Click and drag to rotate
HO NSWGR Platform Signal Box - Left Hand Door 3d printed

DIGITAL PREVIEW
Not a Photo

White Natural Versatile Plastic
HO NSWGR Platform Signal Box - Left Hand Door 3d printed
HO NSWGR Platform Signal Box - Left Hand Door 3d printed

DIGITAL PREVIEW
Not a Photo

HO NSWGR Platform Signal Box - Left Hand Door 3d printed
HO NSWGR Platform Signal Box - Left Hand Door 3d printed

DIGITAL PREVIEW
Not a Photo

HO NSWGR Platform Signal Box - Left Hand Door 3d printed
HO NSWGR Platform Signal Box - Left Hand Door 3d printed

DIGITAL PREVIEW
Not a Photo

HO NSWGR Platform Signal Box - Left Hand Door 3d printed
HO NSWGR Platform Signal Box - Left Hand Door 3d printed

DIGITAL PREVIEW
Not a Photo

HO NSWGR Platform Signal Box - Left Hand Door

Made by
Print With Shapeways
Choose Your Material
$29.42
Choose your color and finish
QTY

Have a question about this product?

contact the designer
You must be logged in and verified to contact the designer.
Product Description
This is a rusticated weatherboard platform-level signal box 17 feet 8 inches long that has been designed based on the signal box once at Kankool. The Greg Edwards S3 Data Sheet was used for dimensions along with photographs of Kankool signal box. The door of this signal box is at the left-hand end as per Kankool.

This signal box is available in both White Natural Versatile Plastic and Grey  Fine Detail Plastic acrylic material.

A set of detail parts in Smooth Fine Detail Plastic (previously called Frosted Ultra Detail) acrylic material is required to complete this signal box. Included in the detail parts are two different doors, windows, water tank, downpipe, gutter and a timber beam fitted with 8 electrical insulators.

Be sure to order the Left Hand Detail Set with the correct left hand doors, it is about how where the hinges and door knobs are and that the door would be hinged on the end wall.

The White Natural Versatile Plastic (previously called White Strong and Flexible - WSF) material has a fine 'sandy' surface that needs to be sprayed with several coats of Auto Primer Filler or Auto Spray Putty and then rubbed back with about 1500 grit Wet and Dry paper to smooth the surface. It is up to the modeller to sand between coats or after several coats. Be careful not to sand any detail awayparticularly the corrugations in the roof. The corrugations could be brushed along their length while the paint is wet to stop the corrugations from filling with paint.

The Smooth Fine Detail Plastic (previously called Frosted Ultra Detail) version only needs to be rinsed in some acetone for a couple of minutes prior to painting. This is to remove any last traces of the waxy support material from the printing process.

Paint with the final colours either in the NSWGR 'Stone' colour scheme or the later pastel colour scheme (usually pale green blue or cream with white trim).

Please note that the model pictured has only one coat of primer followed by the final colours to depict a perhaps more 'normal' finish and not the multiple coats of primer and rubbing back to smooth the surface.
Details
What's in the box:
HO Std Platform Level Signal Box - LH Door
Dimensions:
6.73 x 5.31 x 4.21 cm
Switch to inches
2.65 x 2.09 x 1.66 inches
Switch to cm
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
Logo

Hello.

We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.