1/700 South Korean K2 Black Panther MBT x10

1/700 Scale Modern South Korean K2 Black Panther Main Battle Tank.
Contains 10 highly detailed tanks with accurate Track detail.

Contains:

• 10x South Korean K2 Black Panther Main Battle Tanks

K2 Black Panther Main Battle Tank
The K2 Black Panther (Hangul: K2 '흑표'; Hanja: K2 '黒豹') is the South Korean main battle tank that will replace most of the remaining M48 Patton tanks and complement the K1 series of main battle tanks currently fielded by the Republic of Korea. Mass production commenced in 2013 and the first K2s were deployed with the armed forces in June 2014. The K2 costs over US$8.5 million per unit.

In 1995, the South Korean Agency for Defense Development (Hangul: 국방과학연구소, Hanja: 國防科學硏究所) was given the task of developing a modern armored fighting vehicle based upon Korean state-of-the-art domestic technologies. It was intended for this development program to further modernize the Republic of Korea Army, despite the superior capability of existing K1 and K1A1 designs versus existing North Korean tanks, most of which are aging T-55s and Type 59s. Emphasis upon indigenous technologies would also allow the proposed vehicle to enter the export market without licensing difficulties.

Early design variants included a version with an unmanned turret, which was later scrapped in favor of manned turret designs. It was also planned for the vehicle to be equipped with Rheinmetall's experimental 140 mm smoothbore gun, though this had to be abandoned when Rheinmetall ceased development upon the rationale that its current weapon, the 120 mm/L55 would be more than adequate to counter prospective armored threats for the foreseeable future. The K2 was subsequently reconfigured for the 120 mm/L55, though it is capable of mounting the 140 mm gun with minimum modifications should the need arise.

The design became production-ready in 2006, following 11 years in development and a research budget expenditure of approximately US$230 million, and entered the production phase on March 2, 2007 in Changwon, South Korea. It was planned that the K2 would feature a domestically-designed powerpack, based upon the German-designed MTU-890, comprising a Doosan Infracore Corporation 1,500 horsepower (1,100 kW) 12-cylinder diesel engine and a S&T Dynamics transmission. However, this encountered recurrent technical trouble in testing, leading to a delay in operational deployment of the K2 for 2 years.

In March 2011, South Korea's Defense Acquisition Program Administration (DAPA) announced that mass production of the K2, which the Army was expecting to deploy in 2012, would not happen due to problems concerning its engine and transmission.In April 2012, DAPA announced that due to ongoing issues with the reliability and durability of the domestically-produced powerpack, the first 100 production K2s would use German-made MTU powerpack and that service entry would be delayed until March 2014.

When compared to the K1A1 tank, the K2's main gun reloads quicker and reaches targets faster. Although both are 120 mm, the K2's barrel is 1.3 m (4.3 ft) longer (6.6 m (22 ft) total length), resulting in a higher muzzle velocity of 1,400 m/s (4,600 ft/s) (compared to 1,140 m/s (3,700 ft/s) for the K1A1) for greater accuracy and armor penetration. Other features include the tank's ability to cross a 4 m (13 ft)-deep river, a posture control function that can lower its height by 40 cm (16 in), and a laser warning system that turns the turret towards the source of hostile fire almost instantaneously.

The first 15 K2 Black Panther tanks were put into service in June 2014. Faulty indigenous engines and transmissions previously halted production, but the lowering of required acceleration performance allowed it to enter service. The powerpack will eventually be produced locally, but until that occurs the K2 employs German-made MTU power plants which makes possible the deployment of around 100 vehicles by 2017.Tanks under the second contract, after the first 100 models, were to be built with the domestic Doosan DST 1,500 hp engine and S&T Dynamics automatic transmission, beginning delivery in late 2016.

Hyundai Rotem signed a contract from the second batch of 106 K2 tanks in December 2014, but the vehicles continued to have powerplant issues due to the S&T Dynamics transmission failing durability tests. In February 2018, DAPA announced the second batch would have a "hybrid" powerpack consisting of the locally developed engine with the German RENK transmission system, allowing them to start entering service in 2019. An additional contract for the production of a third batch of about 110 K2s is to follow within the next several years.

Cleaning Information
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain.  It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.

Let your parts sit in direct sunlight for a few hours to fully cure the resin.  
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.      

Painting tips and preparation