3d render showing product detail
1/350 Royal Navy Assorted Deck Hatches Only x75
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$21.43
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
1/350 Scale late 19th Century onwards Royal Navy watertight deck hatches without coaming (assorted) x75. Each hatch has been modelled using Norman Ough plans and the Anatomy of the ship series and covers most type of common deck hatches. See My Shop for 2 other versions including hatches with blast plates and hatches with coaming but no blast plates. Printed on the sprue for ease of painting/airbrushing. This set has been specifically modelled for 1/350 scale.
Set contains:
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. Customers report that "Bestine" and "Goo Gone" also work well.During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.
Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.
Set contains:
- 5x Torpedo Loading Hatches
- 24x Skylight Covers left and right
- 8x 3.6 x 2.3ft Hatches with escape manhole
- 16x 3.6 x 2.3 Hatches (common)
- 8x 4x5ft Quarterdeck hatches
- 8x 4x5ft Quarterdeck hatches (with escape manhole)
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. Customers report that "Bestine" and "Goo Gone" also work well.During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.
Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.
Details
What's in the box:
350 RN Hatches Only.stl
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
