Shapeways + COVID-19  
See Solutions

Click and drag to rotate
Catalina Capri TD=18mm 3.5 inch x 1/2" 3d printed

Not a Photo

White Natural Versatile Plastic
Catalina Capri TD=18mm 3.5 inch x 1/2" 3d printed
Catalina Capri TD=18mm 3.5 inch x 1/2" 3d printed

Not a Photo

Catalina Capri TD=18mm 3.5 inch x 1/2"

3D printed in white nylon plastic with a matte finish and slight grainy feel.

Have a question about this product?

contact the designer
You must be logged in and verified to contact the designer.
Product Description
You can dye the white nylon a color skin deep.  ORANGE for best viewing or BLACK for best UV protection, White is the natural color of nylon.  

Catalina Capri 22   2008

IMPORTANT: This insert is built for a  Track-Depth of 18mm and the feed slot cut is 3 1/2" x 1/2" . 

Center the gate insert into the feed slot.  Each bottom nipple pin has a 1/16" drill guide hole to help mark the location to drill 3/16" holes in feed slot's back web.  Use a thin nail or the 1/16" drill bit to hammer in the hole to act as a center punch to mark the back web for drilling.

The hole will prevent the nylon insert from sliding in the feed slot when under the pressure of the sail slugs running through.
Remove insert before drilling the 3/16" holes, then use a larger drill bit to hand twist for removing burrs around the hole.

Top & Bottom ends of the insert have notches.  Squeezing notches with needle-nose of hemostat plyers to pull the insert up & out.

Please Register your purchase at for a free Two Year Warranty replacement.
Your name, email, City & State, the item you ordered, yr-make-model of the sailboat.

For free 2-year warranty and support, Please register your purchase:
Name, phone number, and email, the part number ordered, sailboat's year, make & model to:
Tom Luque  at

build ref# pg518A Capri TD=18mm 3.5 inch C22 C1
What's in the box:
pg518A Capri TD=18mm 3.5 inch C22 C1
1.6 x 2.02 x 9.16 cm
Switch to inches
0.63 x 0.8 x 3.61 inches
Switch to cm
Success Rate:
First To try.
What's this?
Mature audiences only.
Sign In or Join to comment.


We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.