Click and drag to rotate
Catalina Capri TD=18mm 3.5 inch x 1/2" 3d printed

Not a Photo

White Natural Versatile Plastic
Catalina Capri TD=18mm 3.5 inch x 1/2" 3d printed
Catalina Capri TD=18mm 3.5 inch x 1/2" 3d printed

Not a Photo

Catalina Capri TD=18mm 3.5 inch x 1/2"

3D printed in white nylon plastic with a matte finish and slight grainy feel.

Have a question about this product?

contact the designer
You must be logged in and verified to contact the designer.
Product Description
You can dye the white textured nylon surface a color.  BLACK for best UV protection.  
 (Life-time Warranty if it breaks: Replacement order is $25 plus shipping.)

Catalina Capri 22   2008

IMPORTANT: This insert is built for a  Track-Depth of 18mm and the feed slot cut is 3 1/2" x 1/2" . 

The insert sleeve is symmetrical, with two protruding nipple pins. 
Insert a #55 drill bit into each nipple's drill guide hole before centering the insert into the feed slot.
Lightly hammer the drill bit to make a mark into the aluminum back web. 
Remove the insert to center punch the drilling locations.  First, use 1/8" drill bits, then finish drilling holes with a 3/16" drill bit.  Hand twist a larger drill bit in the holes to remove burrs.

Nipple pins will key into the holes to prevent unintentional sliding of the insert.

Top & Bottom ends of the insert have notches.  Squeezing notches with needle-nose of hemostat plyers to pull the insert up & out.

Please Register your purchase at for a free Two Year Warranty replacement.
Your name, email, City & State, the item you ordered, yr-make-model of the sailboat.

For free 2-year warranty and support, Please register your purchase:
Name, phone number, and email, the part number ordered, sailboat's year, make & model to:
Tom Luque  at

build ref# pg518A Capri TD=18mm 3.5 inch C22 C1
What's in the box:
pg518A Capri TD=18mm 3.5 inch C22 C1
1.6 x 2.02 x 9.16 cm
Switch to inches
0.63 x 0.8 x 3.61 inches
Switch to cm
Success Rate:
First To try.
What's this?
Mature audiences only.


We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.