Click and drag to rotate
TF CW POTP Combiner Spring Tightening Spacers 3d printed

DIGITAL PREVIEW
Not a Photo

White Natural Versatile Plastic
TF CW POTP Combiner Spring Tightening Spacers 3d printed Knees bent.  Arms out.
TF CW POTP Combiner Spring Tightening Spacers 3d printed Knees bent.  Arms out.

DIGITAL PREVIEW
Not a Photo

TF CW POTP Combiner Spring Tightening Spacers 3d printed
TF CW POTP Combiner Spring Tightening Spacers 3d printed

DIGITAL PREVIEW
Not a Photo

TF CW POTP Combiner Spring Tightening Spacers 3d printed Figure Disassembly is Required for installation
TF CW POTP Combiner Spring Tightening Spacers 3d printed Figure Disassembly is Required for installation

DIGITAL PREVIEW
Not a Photo

TF CW POTP Combiner Spring Tightening Spacers 3d printed Remove spring from Combiner Peg.  Insert spacer then reinstall spring and reassemble figure
TF CW POTP Combiner Spring Tightening Spacers 3d printed Remove spring from Combiner Peg.  Insert spacer then reinstall spring and reassemble figure

DIGITAL PREVIEW
Not a Photo

TF CW POTP Combiner Spring Tightening Spacers 3d printed
TF CW POTP Combiner Spring Tightening Spacers 3d printed

DIGITAL PREVIEW
Not a Photo

TF CW POTP Combiner Spring Tightening Spacers

Made by
$6.00
3D printed in white nylon plastic with a matte finish and slight grainy feel.
QTY

Have a question about this product?

contact the designer
You must be logged in and verified to contact the designer.
Product Description
This is a set of Spacers for tightening the Springs in Combiner Wars/Power of the Primes Limb-bots.  Many Combiner Wars figures suffer from low spring tension for their combiner Joints.  Adding in the spacers increases spring tension on the combiner limb joints (Combiner Shoulders and Knees) and allows the combiner to stand more solidly.  This will not fix all the loose joint issues with the figure, but it will certainly help.

This is sold as a set of 4 pieces connected together.  You will need to cut separate them and cut off the excess plastic

This is an advanced upgrade.  You will need to know how to take apart your Combiner Wars/Power Of the Primes/Generation Selects  Figures.  Depenting on the figure, you many need to remove pins from your figures to perform the upgrade.   Please do your research for before atempting to upgrade.  I am not responsible for any damage you do to your figures during the upgrade process.  When you reassemble, install the spacer next to the combiner joint spring.

This is intended for adult figure collectors.  This is not designed for rough play by children.

This was printed and tested on my home 3D printer with PLA plastic.  The test print was installed into Abominus from the PoTP line.  Depending on the plastic you choose, sanding or polish may be needed to fine tune the fit.  

This has been successfully printed in Shapeways Natural Versatile Plastic
Details
What's in the box:
TF CW Spring Tightening Spacers
Dimensions:
6.4 x 1.3 x 0.3 cm
Switch to inches
2.52 x 0.51 x 0.12 inches
Switch to cm
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
Logo

Hello.

We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.