Click and drag to rotate
Mercedes D.IIIa Crankcase (Refactored) 3d printed

Not a Photo

Smoothest Fine Detail Plastic
Mercedes D.IIIa Crankcase (Refactored) 3d printed
Mercedes D.IIIa Crankcase (Refactored) 3d printed

Not a Photo

Mercedes D.IIIa Crankcase (Refactored)

Made by
3D printed in matte translucent plastic that showcases incredibly fine and intricate details.

Have a question about this product?

contact the designer
You must be logged in and verified to contact the designer.
Product Description
Replacement crankcase for WWI Daimler-Mercedes Flugmotor Typ D.IIIa and D.IIIaü (180/200 PS) in 1:32 scale. This is engine that powered most of Germany's late war single-seat fighters, and a number of two seat types as well, notably the later versions of the Albatros series, the Fokker D.VII and the Pfalz D.III and D.XII. Designed to be used with our separated D.IIIa cylinders.

To prepare the parts for painting, scrub them with a toothbrush in ordinary dish washing liquid and rinse thoroughly, or soak them for up to 5 minutes in a small jar filled with acetone (nail polish remover.) Once the waxy support material is completely removed, the parts will appear white wherever support material was needed during printing. We recommend carefully sanding these white areas with a sharpened fine grade sanding stick (or similar) to remove the texture caused by the support material. With care this can be done without spoiling the details.

This product is under development and is specially priced during this phase. Thank you for your support!
What's in the box:
2.83 x 4.19 x 1 cm
Switch to inches
1.11 x 1.65 x 0.39 inches
Switch to cm
Success Rate:
First To try.
What's this?
Mature audiences only.


We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.