White Natural Versatile Plastic
DNA HOLDER V1-15MM
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$8.63
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
The ModSledz 3D Printed DNA holder provides a platform to mount and provide a clean installation in Alpinetech DNA enclosures. Will need 3 #0-80 small pattern nuts and 7/32"length #0-80 screws to mount the board securely with captive #0-80 nuts to the holder and then epoxy the holder into the box. No alignment is necessary with a pre cut enclosure as the holder has been dimensioned to align the buttons and USB port.
The V1 will work with onboard buttons with a 1.5mm flange thickness (DEFAULT FOR ALPINETECH). The select buttons can have a maximum flange diameter of 6mm and the fire button with a flange diameter of 10mm. The holder will also work with an off board fire button setup.
The V1 will work with onboard buttons with a 1.5mm flange thickness (DEFAULT FOR ALPINETECH). The select buttons can have a maximum flange diameter of 6mm and the fire button with a flange diameter of 10mm. The holder will also work with an off board fire button setup.
Details
What's in the box:
DNA HOLDER V1-1.5MM
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
