1/350 Ticonderoga CG-47 class Cruiser Mast
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$35.12
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
Catalog of over 2500 scale models and nameplates (click here).
Scale: 1/350
Recommended to help build any Ticonderoga-class guided missile cruiser, except USS Ticonderoga CG-47 and USS Yorktown CG-48, from:
This fully assembled model represents the large tripod mast of most Ticonderoga-class guided missile cruisers of the US Navy.
Notice: this model is not suitable for the first two ships of the class, USS Ticonderoga CG-47 and USS Yorktown CG-48. Those two ships had quadruped masts, not tripods. Check your references to know if this model is a good match for the ship you are modeling.
This detailed mast is intended as a direct replacement for Dragon, Cyber Hobby, Italeri, and Revell 1/350 scale Ticonderoga-class model kits' parts D26, E1, F28, F29, F32, and F44.
Carefully remove and discard the reinforcing sprue at the mast's bottom. A simple cuticle cutter may work best. Heating the blade also helps. The reinforcing sprue is intended to provide strength to the model during printing and shipping and should be removed by the modeler.
Advice to correct warped parts: Warped parts are caused by the presence of uncured microscopic bits of resin within the parts which is normal characteristic of 3D printing. To correct the warp, fix the warped part(s) of the mast to a flat surface with clear plastic or clear tape being careful to position the bent parts in the desired, straight position. Then expose it (them) to direct sunlight or a UV lamp for a few hours in order to fully harden any bits of liquid resin present. When released from their tape or clear plastic, the now fully hardened parts should retain their straight shape. Ultra violet light hardens the resin, not heat.
This mast cannot be printed in 1/700 scale. Its fine features make it too fragile to print in 1/700.
© Model Monkey LLC. This 3D-printed item may not be copied or recast.
Scale: 1/350
Recommended to help build any Ticonderoga-class guided missile cruiser, except USS Ticonderoga CG-47 and USS Yorktown CG-48, from:
- Cyber Hobby 1/350 scale USS Yorktown CG-48 & Russian Alfa
- Dragon 1/350 scale USS Ticonderoga CG-47
- Dragon 1/350 scale USS Bunker Hill CG-52
- Dragon 1/350 scale USS Mobile Bay CG-53
- Italeri 1/350 scale USS Gettysburg CG-64
- Revell 1/350 scale USS Valley Forge CG-50
- Shanghai Dragon 1/350 scale USS Ticonderoga CG-47
- Shanghai Dragon 1/350 scale USS Mobile Bay CG-53
- and more!
This fully assembled model represents the large tripod mast of most Ticonderoga-class guided missile cruisers of the US Navy.
Notice: this model is not suitable for the first two ships of the class, USS Ticonderoga CG-47 and USS Yorktown CG-48. Those two ships had quadruped masts, not tripods. Check your references to know if this model is a good match for the ship you are modeling.
This detailed mast is intended as a direct replacement for Dragon, Cyber Hobby, Italeri, and Revell 1/350 scale Ticonderoga-class model kits' parts D26, E1, F28, F29, F32, and F44.
Carefully remove and discard the reinforcing sprue at the mast's bottom. A simple cuticle cutter may work best. Heating the blade also helps. The reinforcing sprue is intended to provide strength to the model during printing and shipping and should be removed by the modeler.
Advice to correct warped parts: Warped parts are caused by the presence of uncured microscopic bits of resin within the parts which is normal characteristic of 3D printing. To correct the warp, fix the warped part(s) of the mast to a flat surface with clear plastic or clear tape being careful to position the bent parts in the desired, straight position. Then expose it (them) to direct sunlight or a UV lamp for a few hours in order to fully harden any bits of liquid resin present. When released from their tape or clear plastic, the now fully hardened parts should retain their straight shape. Ultra violet light hardens the resin, not heat.
This mast cannot be printed in 1/700 scale. Its fine features make it too fragile to print in 1/700.
© Model Monkey LLC. This 3D-printed item may not be copied or recast.
Tags
1:350 Military Modern USA 1/350 scale CG-47 Cyber Hobby Dragon Italeri mast Model Monkey ModelMonkey Model_Monkey Revell Shanghai Dragon Ticonderoga class USS Antietam USS Bunker Hill USS Gettysburg USS Lake Champlain USS Leyte Gulf USS Mobile Bay USS Philippine Sea USS Princeton USS Shiloh USS Ticonderoga USS Valley Firge USS Vicksburg USS YorktownDetails
What's in the box:
1-350 Ticonderoga CG-47 Mast
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
