You must be logged in and verified to contact the designer.
N Scale [1:160] CNSM Electroliner. Assembling the model – The holes in the trucks and the under frames are 1.5mm diameter. I use a 1.7mm drill and clean out the holes and fit a 1.6mm x 10mm bolt / cap head bolt [this just allows enough length to double nut the bolt to keep it secure]. Before fitting the wheels to the trucks use a sharp point and gently clean out the axle mounts of any leftover powder residue and use mtl wheels. The middle truck does not have the 3rd rail shoes. The outer two cars [A & A1] are exactly the same and use the same under frame, the inner two cars have different under frames and will only fit in one way on the correct car, look at the top face of the under frame and you will see a raised edge, there is a corresponding cut out in the appropriate car. Have a look at a photograph to put the cars in the correct position. Doing the above assembles an un-powered unit, I am looking to see if it is possible to trim a tomix chassis to fit.
Important - please look at "whats in the box" to be sure of what you are purchasing, pictures may include items that are not included for sale. If you are in any way unsure please ask before buying.