Click and drag to rotate
1/700 German Tiger (P) Heavy Tank x10 3d printed 3d render showing product detail

DIGITAL PREVIEW
Not a Photo

3d render showing product detail
1/700 German Tiger (P) Heavy Tank x10 3d printed 3d render showing product detail
1/700 German Tiger (P) Heavy Tank x10 3d printed 3d render showing product detail

DIGITAL PREVIEW
Not a Photo

1/700 German Tiger (P) Heavy Tank x10 3d printed
1/700 German Tiger (P) Heavy Tank x10 3d printed

DIGITAL PREVIEW
Not a Photo

1/700 German Tiger (P) Heavy Tank x10

Made by
Print With Shapeways
Choose Your Material
$20.25
Choose your color and finish
QTY

Have a question about this product?

contact the designer
You must be logged in and verified to contact the designer.
Product Description
1/700 Scale WW2 German Army Tiger (P) Heavy Tank.
Contains 10 highly detailed tanks.

Contains:
  • 10x Tiger (P) Heavy Tanks

Tiger (P) Heavy Tank
On May 26th of 1941, during the meeting concerning the development of new weaponry, Adolf Hitler ordered both Dr.Porsche and Henschel to supply their designs for a heavy tank, which was to be ready in the summer of 1942. Krupp was in charge of supplying main armament and producing turrets for designs by both Henschel and Porsche. The project was known as the "Tigerprogram".

Only five fully completed Porsche Tigers were issued for training and testing purposes to the facility in Dollersheim, Austria. From August to September of 1943, three of those were converted into recovery vehicles designated - Bergepanzer Tiger (P). On September 22nd of 1942, it was decided to convert 90 of the existing chassis into Ferdinand / Elephant, heavy assault gun and tank destroyers. Based on the experiences of Stalingrad street fighting, on November 22nd of 1942, Hitler approved the production of a single Rammtiger - barricade and obstacle destroyer. Porsche completed the planning stage by December 7th of 1942 and on January 5th of 1943, Adolf Hitler decided that three VK4501(P) chassis are to be modified and converted to Rammtiger / Raumpanzer Tiger (P). This lightly armed (with MG) vehicle was to be a standard VK4501 (P)’s hull mounted with streamlined upper superstructure and front mounted plow (ploughshare). The streamlined shape of the superstructure would allow the rubble to slide off the vehicle. In May of 1943, three superstructures were completed and three Rammtigers were ready in August of 1943. Their fate is unknown after August of 1943, but it is unlikely that they saw any combat and probably remained at Nibelungenwerke. Other sources state that only 1:10 and / or 1:15 scale model was made when the entire concept was rejected and three chassis were used as previously planned.

Cleaning Information
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain.  It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.

Let your parts sit in direct sunlight for a few hours to fully cure the resin.  
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.      

Painting tips and preparation  
Details
What's in the box:
700 Tiger (P) X10.stl
Dimensions:
3.59 x 2.08 x 0.53 cm
Switch to inches
1.41 x 0.82 x 0.21 inches
Switch to cm
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
Logo

Hello.

We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.