1/96 40mm Gun Tub Heerman - Bethlehen - Right Side

1/96model of 40MM twin gun right side TUB Heerman - Bethlehen, forward of the bridge on 01 deck level

Suitable for: The part is meant to represent that carried by USS Heerman and probably other Bethlehem-built Fletchers. Check your references to be sure that this part is right for your ship. There were many variations and versions, so checking your references is really necessary.

Real scaled from original
Hollowed to saved material
Model unpainted

If you need a different size or a custom part designed just for you? 
Please send me a PM.

Some part cleanup will be necessary.  The 3D printing process uses a waxy substance to support certain part features.  Although the parts are cleaned by Shapeways, some waxy residue may remain.  It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners.  Customers report that "Bestine" and "Goo Gone" also work well.

During the printing process, liquid resin is cured by ultraviolet light.  Microscopic bits of resin may remain uncured.  Let your parts sit in direct sunlight for a few hours to fully cure the resin.  

Water-based acrylic paints meant for plastics is strongly recommended.  Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.