Click and drag to rotate
1/200 Royal Navy 4" Ready Use Lockers (Large) x8 3d printed 1/200 Royal Navy 4" Ready Use Lockers (Large) x8

DIGITAL PREVIEW
Not a Photo

1/200 Royal Navy 4" Ready Use Lockers (Large) x8
1/200 Royal Navy 4" Ready Use Lockers (Large) x8 3d printed 1/200 Royal Navy 4" Ready Use Lockers (Large) x8
1/200 Royal Navy 4" Ready Use Lockers (Large) x8 3d printed 1/200 Royal Navy 4" Ready Use Lockers (Large) x8

DIGITAL PREVIEW
Not a Photo

1/200 Royal Navy 4" Ready Use Lockers (Large) x8 3d printed 1/200 Royal Navy 4" Ready Use Lockers (Large) x8
1/200 Royal Navy 4" Ready Use Lockers (Large) x8 3d printed 1/200 Royal Navy 4" Ready Use Lockers (Large) x8

DIGITAL PREVIEW
Not a Photo

1/200 Royal Navy 4" Ready Use Lockers (Large) x8 3d printed 1/200 Royal Navy 4" Ready Use Lockers (Large) x8
1/200 Royal Navy 4" Ready Use Lockers (Large) x8 3d printed 1/200 Royal Navy 4" Ready Use Lockers (Large) x8

DIGITAL PREVIEW
Not a Photo

1/200 Royal Navy 4" Ready Use Lockers (Large) x8 3d printed 1/200 Royal Navy 4" Ready Use Lockers (Large) x8
1/200 Royal Navy 4" Ready Use Lockers (Large) x8 3d printed 1/200 Royal Navy 4" Ready Use Lockers (Large) x8

DIGITAL PREVIEW
Not a Photo

1/200 Royal Navy 4" Ready Use Lockers (Large) x8 3d printed 3D render showing product detail
1/200 Royal Navy 4" Ready Use Lockers (Large) x8 3d printed 3D render showing product detail

DIGITAL PREVIEW
Not a Photo

1/200 Royal Navy 4" Ready Use Lockers (Large) x8

Made by
Not For Sale

Have a question about this product?

contact the designer
You must be logged in and verified to contact the designer.
Product Description
1/200 Scale Royal Navy 4" Ready Use Lockers (Large) x8. These are highly detailed and accurate parts modelled from plans and photographic reference. These Lockers would have been used on most/all Allied Warships that carried the 4" MKXVI Guns. Coming soon the smaller versions of these lockers that would have been also used by most warships carrying these guns.
  • 8x Lockers
  • Highly detailed, modelled from plans and photographic reference.
  • These parts are printed with Door facing up to minimise wax support for maximum detail.
  • Locker is also hollow to minimise cost.
  • Details include Hex nuts, 4x Doors with embossed pattern, Hinges, Locking Handles and Locker Support Plates

Cleaning Information
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain.  It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.

Let your parts sit in direct sunlight for a few hours to fully cure the resin.  
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.      

Painting tips and preparation         











              

                








 
Details
Logo

Hello.

We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.