DJI Phantom Mark-1 Landing GearProduct Description:
Transform your DJI Phantom *
with this great looking Mark-1 Landing Gear upgrade-kit.
It does not only look great, it has more open space on the front of the craft than ever before what makes this landing gear ideal for use with a gimbal.Main Features:
The Mark-1 is compatible with the following DJI Phantom models: 1, FC40, 2 and Vision.
In case of the Phantom 1 and FC40 and depending of your model version you need one, both or neither of the antenna mounts included in this set. You won't need the CAN-Bus Expansion Module Mount.
In case of the Phantom 2 and Vision you only need one of the two Antenna Mounts included in this set and will have one spare.
What is included:2 - 3 gram Main leg frames for 6mm tubing
2 - 2 gram Main feet frames for 6mm tubing
4 - 1 gram Leg Ends (feet) for 6mm tubing
1 - 1 gram Compass Mount for 6mm tubing
2 - 1 gram Antenna Mounts
1 - 1 gram CAN-Bus Expansion Module Mount
What is not included but required:6 - M3x6 screwsCheck your local DIY shop or check here on eBay.
4 - 6mm Carbon or aluminum tubing ( I used 2x 160mm and 2x 220mm hollow 6mm tubing)
For 6mm hollow carbon fiber tubing check here on eBay.
For 6mm hollow aluminium tubing check your local DIY shop or eBay.
Small pieces of tape (for mounting the antennas on to the antenna mounts)
- ?See video and photos above for an impression and building instructions.
- For loosening and fastening the phantom compass don't use a screwdriver with a strong magnetic head!! And make sure that you mount the compass perpendicular to the body, in a vertical position for best flight performance. And don't forget to calibrate the compass after installation.
- If you decide to go for the color white, than keep in mind that this color can become discolored over time (sun, dirt, touch etc.).
This Landing Gear is compatible with the DJI Phantom 1, FC40, 2 and Vision.**
The weight is based on a fully assembled landing gear on a DJI Phantom 2 consisting of 6 M3x6 screws, 2 vertical 160mm legs, 2 horizontal 220mm legs from hollow 6mm carbon tubing. The compass and CAN-Bus extension port are also included in the weight.
The same configuration only with aluminum tubing weighs 54 gram.(not all parts mentioned above are included in this set, see "What is not included but required:")
If you have any comments, feedback or questions please contact me
or leave a comment below
And if you like this product please like this page or leave a nice comment below
Thanks and have Fun flying your Phantom!!
I can not be held responsible for any kind of defects or damage that arise when performing this upgrade