Click and drag to rotate
22mm 510 Tap Guide (ID 10mm) 3d printed

DIGITAL PREVIEW
Not a Photo

White Natural Versatile Plastic
22mm 510 Tap Guide (ID 10mm) 3d printed
22mm 510 Tap Guide (ID 10mm) 3d printed

DIGITAL PREVIEW
Not a Photo

22mm 510 Tap Guide (ID 10mm)

Made by
$8.70
Ships as soon as 5 days
3D printed in white nylon plastic with a matte finish and slight grainy feel.
QTY

Have a question about this product?

contact the designer
You must be logged in and verified to contact the designer.
Product Description

This is a tap guide for a 22mm 510.   All of my enclosure designs have a 9.5mm center hole to allow for thread tapping abd the idea is to insert it in the 510 recess of the mod so that a hand drill can be used to tap the 510 center hole to allow for screwing down the 510 connector.  I actually use this and tap by hand most of the time sans drill.  It isn't really necessary if you are confident you can tap straight without a guide or if you are just going to open up the hole to 10mm with a drill bit.

Details
What's in the box:
22mm Tap Guide 10mm Id
Dimensions:
2.2 x 2.2 x 3 cm
Switch to inches
0.87 x 0.87 x 1.18 inches
Switch to cm
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
Logo

Hello.

We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.