LB&SCR E2 - 2FS - 1:152
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$38.73
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
LB&SCR E2 - in 2mm, 2FS 1:152 scale.
If you want one a fraction bigger in British N / 1:148 scale it is available already.
The E2 has been scaled down from the N version with a few details tweaked and inside walls thickened to be able to print in the smaller scale.
Please note - the prototype photographs sometimes showed the Smoke-Box to have rivets and other times none at all. For this reason this model has been designed as the smooth type to print better and provide a better canvas. Rivets can be added by buying transfer decals that have physical relief. DCC Concepts is one manufacturer that supplies them.
BODY INSTRUCTIONS:
The Smoke-Box Door is loose. The cab roof is loose. The buffers are joined to the bufferbeam already.
The pipe along the boiler will need fabriacting from some Evergreen plastic rod or brass/nickel silver rod, same for the cab handrails. Refer to prototype photographs.
You will need hand rail pillars or split pins and 0.3mm or less rod for the hand rails. To make the accurate positioning and fitting easier, holes have been slightly indented on the body; they just need drilling out.
If you want one a fraction bigger in British N / 1:148 scale it is available already.
The E2 has been scaled down from the N version with a few details tweaked and inside walls thickened to be able to print in the smaller scale.
Please note - the prototype photographs sometimes showed the Smoke-Box to have rivets and other times none at all. For this reason this model has been designed as the smooth type to print better and provide a better canvas. Rivets can be added by buying transfer decals that have physical relief. DCC Concepts is one manufacturer that supplies them.
BODY INSTRUCTIONS:
The Smoke-Box Door is loose. The cab roof is loose. The buffers are joined to the bufferbeam already.
The pipe along the boiler will need fabriacting from some Evergreen plastic rod or brass/nickel silver rod, same for the cab handrails. Refer to prototype photographs.
You will need hand rail pillars or split pins and 0.3mm or less rod for the hand rails. To make the accurate positioning and fitting easier, holes have been slightly indented on the body; they just need drilling out.
Details
What's in the box:
2FS - LB&SCR E2 - Body
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
