3d render showing product detail
1/700 Hungarian OT-65A Vydra AFV x10
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$20.81
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
1/700 Scale Modern Hungarian OT-65A Vydra Armoured Fighting Vehicle.
Contains 10 highly detailed tanks.
Contains:
Hungarian OT-65A Vydra Armoured Fighting Vehicle
Independently designed for the Hungarian army, though often likened to the Soviet BRDM-1, the OT-65 is an armored scout car that was first produced in early 1964. The OT-65A is a successive upgrade to this vehicle, sometimes going by the designation "Vydra", or Otter, which uses the turret of the OT-62B TOPAS. It differs from the original OT-65 by way of entry hatches behind the turret and additional protection on its driving lights.
Cleaning Information
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.
Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.
Painting tips and preparation
Contains 10 highly detailed tanks.
Contains:
- 10x Hungarian OT-65A Vydra Armoured Fighting Vehicles
Hungarian OT-65A Vydra Armoured Fighting Vehicle
Independently designed for the Hungarian army, though often likened to the Soviet BRDM-1, the OT-65 is an armored scout car that was first produced in early 1964. The OT-65A is a successive upgrade to this vehicle, sometimes going by the designation "Vydra", or Otter, which uses the turret of the OT-62B TOPAS. It differs from the original OT-65 by way of entry hatches behind the turret and additional protection on its driving lights.
Cleaning Information
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.
Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.
Painting tips and preparation
Details
What's in the box:
700 OT-65A Vydra X10.stl
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
