Ask us about bulk pricing  
CONTACT US

Click and drag to rotate
Variable Riser Adapter for BMW Nav5/6 Mount Cradle 3d printed

DIGITAL PREVIEW
Not a Photo

Variable Riser Adapter for BMW Nav5/6 Mount Cradle 3d printed
Variable Riser Adapter for BMW Nav5/6 Mount Cradle 3d printed

DIGITAL PREVIEW
Not a Photo

Variable Riser Adapter for BMW Nav5/6 Mount Cradle 3d printed
Variable Riser Adapter for BMW Nav5/6 Mount Cradle 3d printed

DIGITAL PREVIEW
Not a Photo

Variable Riser Adapter for BMW Nav5/6 Mount Cradle 3d printed
Variable Riser Adapter for BMW Nav5/6 Mount Cradle 3d printed

DIGITAL PREVIEW
Not a Photo

Variable Riser Adapter for BMW Nav5/6 Mount Cradle

Made by
$60.63
3D printed in black nylon plastic with a matte finish and slight grainy feel.
QTY

Have a question about this product?

contact the designer
You must be logged in and verified to contact the designer.
Product Description
*This is not a product from or made by Bayerische Motoren Werke AG and BMW of North America, LLC (“BMW”), who own the trademarks related to BMW automobiles.*

Mount Adapter for lockable BMW Navigator V/VI mount cradle in Normal or Portrait mode.

Easy to switch Normal or Portrait mode for the whole cradle.

Multipart design/set for easier printing and ordering, connected with sprues. You just cut the sprues to separate the 2 parts.

You have to supply to following material

To attach "head" adapter to mount cradle:
  • 1x M8 nut (max. height 6.5mm, lock nut is too high!)
  • 1x M8x30mm screw
  • 4x M4x30mm screws (original parts, you should already have them)
To attach "base" adapter to bar:
  • 4x M4 nuts
  • 4x M4x20mm screws

All original parts are used in this setup.

To install:
  • 1st, because the nylon adapter does not have much grip against the powder coated bar, you should fit a piece of fabric/texile tape underneath.
  • 2nd, the "base" adapter has to be fastened to the bar using the original backplate, M4x20mm screws and washers
  • 3rd, the M8 nut has to be placed on the front side of the "head" adapter (the side that is later not accessible anymore)
  • 4th, the M4 nuts have to be placed on the back of the "head" adapter
  • 5th, the mount cradle has to be fastened to the "head" adapter
  • 6th, the "head" adapter can be clipped Normal or Portrait into the "base" adapter and secured with the M8x30mm screw
Details
What's in the box:
Variable Riser Adapter for BMW Nav5/6 Mount Cradle
Dimensions:
6.08 x 6.7 x 8.3 cm
Switch to inches
2.39 x 2.64 x 3.27 inches
Switch to cm
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
Sign In or Join to comment.
 
 
Logo

Hello.

We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.