You must be logged in and verified to contact the designer.
1/35 Scale British QF 2-pounder MK XIV Rolls Royce Gun x1. Very highly detailed part modelled using the John Lambert plans and drawings and reference photographs.
Hex Nuts, Rivets and Shell in loading position
Gun can be angled and trained as desired (maximum elevation 60º, depression 12º)
Sighting and Trigger apparatus
Set comes in 4 parts: Main Barrel, Base, Trunnion/Shield and Locking Pin for Barrel
Historial Information The QF 2-pounder Mark XIV, or Rolls 2 pounder, was developed by Rolls-Royce as a competitor to the 40 mm "Vickers S" gun as an aircraft weapon. The latter was the more successful design, and found some use as an anti-tank weapon. A reworked version was adopted by the Royal Navy as a weapon for Motor Gun Boats, being adopted in the Fairmile C type. It had a semi-automatic horizontally sliding breech block, and was shipped on a manually trained pedestal mount. The weapon was not a success, and of the 1,200 ordered only some 600 were delivered. It was replaced by the Molins 6-pounder gun, the British Army's Ordnance QF 6 pounder gun (57 mm) with an auto-loader.
Cleaning Information Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.
Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended.
Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts. Please take a look at my other items.