You must be logged in and verified to contact the designer.
Mini-z front single piece suspension bulkhead for double-A-arm suspension parts. A-arm front track width reduced by 0.3mm on both sides to better suit the available tie-bars. Holes need finalizing for correct sizes (1.5mm, 2.0mm, and ~1.7mm for threaded M2 screws). It will fit MR03 and MR03VE with the same modfications as a standard PN Racing double A-arm. It does require the other parts of a standard MR02/MR03 double-A-arm front end. The fitment of the parts cannot be guaranteed, but have been tested on track. This version has a level upper arm with 0 degrees of reactive caster angle. The upper axle has room for a shim to fine tune caster. This part will simplify the tuning of the front end of a double A-arm front end and remove much of the unwanted play in parts fitment. Parts probably will need fine tuning for best fit and slack-free operation.