You must be logged in and verified to contact the designer.
For a snug fit, Verify:
Track Depth from uncut Track = 17.4mm (11/16" = 0.687")
Feed slot cut out = 6" x .488"
Sail slug width = 3/8" ( or 9mm)
IMPORTANT ! Search for other Track Depths if yours is different.
Make color selection before clicking the order button. ORANGE for best viewing or BLACK for best UV protection and White to save on cost.
Center the gate insert into the feed slot. Each bottom nipple pin has a 1/16" drill guide hole to help mark the location to drill 3/16" holes in feed slot's back web.
The holes will prevent the nylon insert from sliding in the feed slot when under pressure of the sail slugs running through.
Remove insert before drilling the 3/16" holes, then use a larger drill bit to hand twist for removing burrs around the hole.
Top & Bottom ends of the insert have notches. Squeezing notches with needle-nose of hemostat plyers to pull the insert up & out.
Reviewed on StingySailor: https://stingysailor.com/2018/03/03/product-review-mastgates-sail-track-gates-2/
Please Register your purchase at Info@MastGates.com for a free Two Year Warranty replacement.
Your name, email, City & State, the item you ordered, yr-make-model of the sailboat.
For free 2-year warranty and support, please register your purchase:
Name, phone number and email, the part number ordered, sailboat's year, make & model to:
Tom Luque at info@MastGates.com