Click and drag to rotate
HopChop Mk4 Blade Fixture - R-Hop Cutting Jig 3d printed

DIGITAL PREVIEW
Not a Photo

White Natural Versatile Plastic
HopChop Mk4 Blade Fixture - R-Hop Cutting Jig 3d printed
HopChop Mk4 Blade Fixture - R-Hop Cutting Jig 3d printed

DIGITAL PREVIEW
Not a Photo

HopChop Mk4 Blade Fixture - R-Hop Cutting Jig

Print With Shapeways
Choose Your Material
$11.83
Choose your color and finish
QTY

Have a question about this product?

contact the designer
You must be logged in and verified to contact the designer.
Product Description
The is one half of the HopChop cutting jig. When paired with a HopChop Feed Guide matching your tubing diameter, the HopChop provides infinite adjustment in the cutting depth of the silicone tubing used to make R-Hop patches. R-Hop is an accepted method in the airsoft community to apply a consistant and tunable backspin on the BB pellet. Check out the AirsoftMechanics forum for more details about R-Hop.

The job of the blade fixture is to:
  1. Hold the single edge razor blade securly during the cut
  2. Hold the feed guide and allow adjustment of the cut depth
  3. Facilitiate a secure grip on the jig during cutting
 
***The blade fixture needs either magnets or paper clips (not included) to hold the blade in place while cutting***
The blade fixture is designed to hold two neodymium magnets that secures the razor blade. The Mk4 blade fixture now supports 6 mm round by 1 mm tall magnets that are easier to source from ebay. The magents are glued to the fixture using superglue. A razor blade can then be attached and changed as needed. While the fixture was originally designed for magnets, it was found that small binder clip can be used instead of magents and work pretty well! (see pictures on FAQ page)

An additional step in prepping the blade fixture is to color the measurement mark. Only the first mark is needed and should be colored in with a fine point ink or gel marker. Alternatively, the mark can be white on black by using white out.

Find more at the Spin Rate Engineering website.
 
Details
What's in the box:
HopChop Fixture Mk4
Dimensions:
4.27 x 2.27 x 3.35 cm
Switch to inches
1.68 x 0.89 x 1.32 inches
Switch to cm
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
Logo

Hello.

We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.