3d render showing product detail
1/350 Dual Purpose 5.25 Inch Guns 1943 x5
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$27.69
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
1/350 Scale Dual Purpose 5.25 Inch Guns x5. These are highly detailed parts for anyone wishing to build late war (1943) HMS Dido, HMS Argonaut, HMS Charybdis, HMS Phoebe, HMS Hermione, HMS Bonaventure, HMS Scylla, HMS Naiad, HMS Cleopatra, HMS Sirius or HMS Euryalusin. The 1943 upgrades have extra ventilation on the front and access hatches set in cupolas on the mounting roof.
Cleaning Information
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.
Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.
Painting tips and preparation
- 5x Mountings
- Highly detailed, accurate replacement parts, modelled from plans and photographic reference.
- Barrels are printed separately and can be angles as desired
- details include Hex nuts, open sighting ports, accurate venting and access hatches
Cleaning Information
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.
Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.
Painting tips and preparation
Details
What's in the box:
350 5.25 Twin RN Sprue 1943 x5.stl
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
