Click and drag to rotate
STAAG 1921@110 19mm(Front)x21mm(rear) 3d printed

Not a Photo

Black Natural Versatile Plastic
STAAG 1921@110 19mm(Front)x21mm(rear) 3d printed
STAAG 1921@110 19mm(Front)x21mm(rear) 3d printed

Not a Photo

STAAG 1921@110 19mm(Front)x21mm(rear)

Made by
Print With Shapeways
Choose Your Material
Choose your color and finish

Have a question about this product?

contact the designer
You must be logged in and verified to contact the designer.
Product Description
STAAG is a microphone array that combines two near-coincident arrays (one forward-facing, and one rearward facing). The concept is that front and rear components are blended to adjust the perception of natural room ambience.

The STAAG Microphone Array Mount 19mm/21mm is designed to accommodate 1 pair of (front-facing) 19mm diameter microphones and one pair of (rear facing) 21mm diameter microphones. Both pairs are splayed at a 110 degree angle.

STAAG works well with cardioid mics in the front channels and shotgun mics in the rear channels, however many combinations can be used successfully in a variety of situations.

More information on STAAG can be found here:
or here:
What's in the box:
STAAG 19x21mm v3
11.17 x 14.55 x 3.65 cm
Switch to inches
4.4 x 5.73 x 1.44 inches
Switch to cm
Success Rate:
First To try.
What's this?
Mature audiences only.


We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.