You must be logged in and verified to contact the designer.
Designed to fit T-Jet style HO slot car chassis.
Front axle is set in front of the chassis. The builder will need to supply their own motor and exhaust pipes from a donor diecast car of their choice (Hot Wheels, Matchbox, or resin cast).
"Versatile" plastics have a gritty surface and will require priming with a couple of light coats of a spray filler/primer like Rustoleum. Sand between coats with fine grit paper, ending with a final 1000+ grit wet sand. Then color and clear coat for a super smooth finish.
Also available in "Smooth Fine Detail Plastic". Which should require less prep time, but may be durable than the default white nylon finish.
I'd recommend using a narrower diameter front axle than the standard T-Jet. You have to drill the deliberately undersized holes to your specs. Use a drill bit the size of your axle, and twist it through by hand. Start with a smaller bit and work your way up to the size need for your axle.
The center bar through the engine compartment is there just for additional support during printing. Snip it out to make room for your choice of "show" engine. I hear Hot Wheels has some nice options! Note: you'll need a mini machine bolt and nut in leiu of a front screw post to hold together the guidepin, chassis, and body. You can find them at nearly any local hardware store.
Show off your modelling skills! Send me pics of your builds, and I'll include them in the photo gallery with your name in the caption if you like.