Segnale a vela quadra su staffa frontale -scala TT
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$9.48
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
Fedele riproduzione in scala TT (1:120) di un segnale ferroviario ad un fuoco con vela quadrata montato tramite staffa frontale su palo completo di piattaforma e scala. Il modello si compone di tre parti: palo, segnale e bordo bianco. Ripulite le tre parti dai residui di cera e' possibile assemblare il tutto aggiungendo un led a tre colori (rosso, verde e giallo) che puo' essere acquistato con i conduttori gia' saldati at the following link: https://www.ebay.it/itm/T0603RGY-40pcs-Pre-soldered-micro-litz-wired-leads-Red-Green-Yellow-SMD-Led-0603-/202529500495. Il segnale e' predisposto per far passare i conduttori elettrici all'interno del palo.
Nota bene: per quanto questo modello sia già stato realizzato numerose volte, può capitare che shapeways si rifiuti di stamparlo, adducendo problemi tecnici. Ci scusiamo della cosa, la quale è completamente indipendente dalla vostra volontà; se ciò dovesse verificarsi l’ordine verrà annullato e non vi verrà addebitato alcun costo.
Accurate reproduction in TT scale (1: 120) of a railway signal with one light and square panel. It's mounted using a frontal bracket on a pole complete with platform and ladder. The model is composed of three parts: pole, signal and white frame. Once cleaned up the three parts to remove wax residues, especially inside the pole, you can assemble it all by adding a three colors LED (red, green and yellow) that can be purchased with the wires already welded by ebay at the following link: https://www.ebay.it/itm/T0603RGY-40pcs-Pre-soldered-micro-litz-wired-leads-Red-Green-Yellow-SMD-Led-0603-/202529500495 . The signal is designed to pass the electrical conductors inside the pole.
Disclaimer : although this model has already been created numerous times, it may happen that shapeways refuses to print it, citing technical problems. We apologize for this, which is completely independent of your will; should this occur, the order will be canceled and you will not be charged any costs.
Nota bene: per quanto questo modello sia già stato realizzato numerose volte, può capitare che shapeways si rifiuti di stamparlo, adducendo problemi tecnici. Ci scusiamo della cosa, la quale è completamente indipendente dalla vostra volontà; se ciò dovesse verificarsi l’ordine verrà annullato e non vi verrà addebitato alcun costo.
Accurate reproduction in TT scale (1: 120) of a railway signal with one light and square panel. It's mounted using a frontal bracket on a pole complete with platform and ladder. The model is composed of three parts: pole, signal and white frame. Once cleaned up the three parts to remove wax residues, especially inside the pole, you can assemble it all by adding a three colors LED (red, green and yellow) that can be purchased with the wires already welded by ebay at the following link: https://www.ebay.it/itm/T0603RGY-40pcs-Pre-soldered-micro-litz-wired-leads-Red-Green-Yellow-SMD-Led-0603-/202529500495 . The signal is designed to pass the electrical conductors inside the pole.
Disclaimer : although this model has already been created numerous times, it may happen that shapeways refuses to print it, citing technical problems. We apologize for this, which is completely independent of your will; should this occur, the order will be canceled and you will not be charged any costs.
Details
What's in the box:
Segnale a vela quadra su staffa frontale -scala TT
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
