Accurate Sized/Shape/Detail Belt Capsules for your 1/6th SUPER HERO BAT DARK KNIGHT figure.
Parts will come unpainted, and need a light clean up before painting. Then just simply glue on to your own belt material in proper postion.
Set Includes 10 Flat End Capsules ONLY nothing else is included. Belt Material Not Included!
Any questions please feel free to ask.
****RECOMMENDED PAINTING TIPS****
- Lightly sand with 600 Grit Sand Paper and finish with 1000 Grit
- Place parts in a cup of Warm to Hot Water(NOT BOILING) with 4-5 drops of mild dish washing detergent. Swoosh around slowly for about 30-45sec to mix detergent and water. Allow parts to sit in cup of water for a few hours to help clean off sanding dust and excess printing materail and any oilly like substance that was applied during the print process.
- Take parts out and Rinse parts with clean warm water to remove soap and allow to dry on paper towel.
- When Dry, I like to use a light primer like Tamiya or Mr. Surfacer 1000 and apply just a few light coats.
- Now that your primer has dried for a few hours use your paint of choice, and follow that up with your choice of finishing clear coat.
******************************************************
You do not have to follow these steps, but this is what I do to get the part to look the best.