You must be logged in and verified to contact the designer.
Product Description
Feed slot requires grooves cut into walls of feed slot.
Sail slug diameters must be 3/8" or 9mm. ie A017S, A017, A0117
Ask for instruction. See video: https://youtu.be/kjJ8F6KNM1Q
Center the gate insert into the feed slot. Each bottom nipple pin has a 1/16" drill guide hole to help mark the location to drill 3/16" holes in the feed slot's back web. The holes will prevent the nylon insert from sliding in the feed slot when under the pressure of the sail slugs running through. Remove insert before drilling the 3/16" holes, then use a larger drill bit to hand twist for removing burrs around the hole. Top & Bottom end notches of the insert are for squeezing with needle-nose of hemostat plyers to pull the insert up & out.
Other lengths can be requeated from Tom Luque info@MastGates.com
Discounted warranty replacements if there is a failure within 3 years.
10/23/20 New ref# pg537b D1 TD13.5 nipple Barb 106mm v.306
We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers: