Click and drag to rotate
Indicator internal '72-'74 VW bus (6mm, paddle end 3d printed

DIGITAL PREVIEW
Not a Photo

Black PA12
Indicator internal '72-'74 VW bus (6mm, paddle end 3d printed
Indicator internal '72-'74 VW bus (6mm, paddle end 3d printed

DIGITAL PREVIEW
Not a Photo

Indicator internal '72-'74 VW bus (6mm, paddle end 3d printed
Indicator internal '72-'74 VW bus (6mm, paddle end 3d printed

DIGITAL PREVIEW
Not a Photo

Indicator internal '72-'74 VW bus (6mm, paddle end 3d printed
Indicator internal '72-'74 VW bus (6mm, paddle end 3d printed

DIGITAL PREVIEW
Not a Photo

Indicator internal '72-'74 VW bus (6mm, paddle end

Made by
Print With Shapeways
Choose Your Material
$15.00
Choose your color and finish
QTY

Have a question about this product?

contact the designer
You must be logged in and verified to contact the designer.
Product Description
This is basically the "guts" of the '72-'74'bay window bus indicator switch. Many suffer very badly from broken arms on the sides and/or one of the pivot pins breaking off. This is now the 6th drawing modeled up now with great results to this point. I always welcome feedback from buyers on the fit and form so that it can be improved if need be.

Post polishing of mating surfaces has been recommended by our installers. (light work with some fine sand paper)

Keep in mind that some '72 indicator stalks are 5mm instead of 6mm, so check yours before ordering. The 5mm version can be identified by the "lozenge" end of the stick as opposed to the "paddle" found on the 6mm.
I encourage you to measure before ordering.
The 5mm version can be found here - 
https://www.shapeways.com/product/JCWP66GS8?key=a7cb6e8b2f12fba23c63a2a9a136369d

(please note that the hole for the roll pin holding the indicator arm is undersize for a good fit, it needs to be drilled to 2mm)

Other parts avalible - 
Bridge for indicator switch '72 - '74 VW Bus - 
Hammer for indicator switch '72- '74 VW Bus- 
Base for indicator switch '72 - '74 VW Bus- 
Indicator internal '72-'74 VW bus (5mm, lozenge end) - https://www.shapeways.com/product/JCWP66GS8?key=a7cb6e8b2f12fba23c63a2a9a136369d
Bridge for the wiper switch '72 - '74 VW Bus- https://www.shapeways.com/product/ZUBY2VZWL/wiper-switch-bridge-v1-2-for-1972-74-vw-bus
 
Details
What's in the box:
indicator internal for 6mm arm
Dimensions:
2.8 x 1.9 x 3.1 cm
Switch to inches
1.1 x 0.75 x 1.22 inches
Switch to cm
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
Logo

Hello.

We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.