Catalog (click here)
Each 3D-printed Essex class island design is unique.
Recommended Korean War-era SCB-27 island for:
- Dragon 1/700 USS Essex CV-9 (# 7049)
- Dragon 1/700 USS Hornet CV-12 (# 7085)
- Dragon 1/700 USS Lexington CV-16 (# 7051)
- Dragon 1/700 USS Randolph CV-15 (# 7050)
- Dragon 1/700 USS Hancock CV-19 (# 7056)
- Dragon 1/700 USS Bob Homme Richard CV-31 (# 7063)
- Dragon 1/700 USS Antietam CV-36 (# 7064)
- Dragon 1/700 USS Boxer LPH-4 (# 7070)
- Dragon 1/700 USS Princeton CV-37 (# 7079)
- Hasegawa 1/700 USS Essex CV-9 (# 102, 44108 and WL-A108)
- Hasegawa 1/700 USS Yorktown CV-10 (# 44709)
- Hasegawa 1/700 USS Ticonderoga CV-14 (# 44710)
- Hasegawa 1/700 USS Hancock CV-19 (# 113)
- Trumpeter 1/700 USS Essex CV-9 (# 05728)
- Trumpeter 1/700 USS Yorktown CV-10 (# 05729)
- Trumpeter 1/700 USS Franklin CV-13 (# 05730)
- Trumpeter 1/700 USS Ticonderoga CV-14 (# 05736)
- Trumpeter 1/700 USS Hancock CV-19 (# 05737)
Recommended island to build a Korean War-era USS Wasp CV-18 from any World War Two-era straight-deck 1/700 scale Essex class aircraft carrier kit. This model represents the SCB-27 modernized island of Essex class aircraft carrier USS Wasp CV-18 as it appeared circa 1953. She had this new island but retained her straight flight deck during this time. With minor modifications, it can be adapted to represent other Korean War-era straight-deck Essex class carriers.
- fully assembled
- open bridge and PriFly windows with delicate framing
- details consistent with photos of the actual ship
- decks properly offset to port, they should NOT be centered on the island
- properly shaped decks and deck features
- accurately shaped radar platform aft of the island
- battle lookout details
- flag lockers and splinter shielding shape specific to Wasp
- deck supporting structure details accurately positioned as confirmed by photos of the real ship
- delicate exterior piping detail and routing specific for Wasp
- porthole rigols ("eyebrows")
- closed A/T doors of the proper type
- door overhead chevron-shaped rain deflectors
- open funnel cap (grille not included), ready for your favorite photoetch set
These 3D-printed acrylic parts are designed to accurately represent features of the actual ship. They are not 3D-printed copies of plastic kit parts. Be advised that modernized SCB-27 islands were shorter at the aft end than they were during World War II. Some adjustment to your plastic kit's flight deck parts or other aftermarket parts such as photoetch or wood decks may be necessary for best fit. To fit this acrylic island to your plastic kit's flight deck, please remove the raised locator strips on the plastic kit's flight deck part. A simple cuticle cutter can cleanly and easily remove these raised locator features.
Model Monkey Essex class Products (each island design is specific to the actual ship circa the year stated, these islands are not the same design):
Click here for cleaning and painting advice.
© Model Monkey Book and Hobby. This 3D-printed item may not be copied or recast.
From Wikipedia: "Officially, Ship Characteristics Board Program 27 proper referred to the completion of Oriskany, left unfinished at war's end, to a heavily revised design; reconstructions of earlier ships were programs SCB-27A and 27C. The SCB-27 modernization was very extensive, requiring some two years for each carrier. To handle the much heavier, faster aircraft of the early jet-era, the flight deck structure was significantly reinforced, able to support aircraft weighing up to 52,000 pounds (23,587 kg), namely the North American AJ Savage. Stronger and larger elevators, much more powerful catapults, and new Mk 5 arresting gear were installed. The original four twin 5-inch/38 gun mounts were removed, clearing the flight deck of guns. The new five-inch gun battery consisted of eight weapons, two on each quarter beside the flight deck. Twin 3-inch/50 gunmounts replaced the 40 mm guns, offering much greater effectiveness through the use of proximity fuzed ammunition. The reconstruction eliminated the difference between "short-hull" and "long-hull" ships; all now had similar clipper bows.
"The island was completely redesigned, made taller, but shorter in overall length....In addition, the boiler uptakes were rebuilt and angled aft to accommodate a single radar and communications mast atop the island.
"Despite the drastic alteration of the carriers' appearance, the SCB-125 refit involved relatively little modification of the ships' existing structure compared to SCB-27, and took around six to nine months as against the approximately two years of the earlier program. The original SCB-27A vessels, which were fitted with a pair of H 8 hydraulic catapults, were not upgraded with the C 11 steam catapults fitted to their SCB-27C sister ships due to machinery space limitations. The SBC-27As also did not receive the enlarged No. 1 (forward) elevator installed in the 27C ships as part of SBC-125 [flight deck modified to an angled-deck design].
"The first three 27C ships (Hancock, Intrepid and Ticonderoga) had had their No 3 elevators moved from the centerline to the starboard deck edge, in a position relatively far aft. The next three (Shangri-La, Lexington and Bon Homme Richard), which underwent 27C and 125 concurrently, had the elevator relocated to a deck-edge position farther forward, and this location was used for the 27A ships as they in turn underwent SCB-125."