Ad
Springer H-Bitt (small for sides) set of 4 (1/16)
Made by
Print With Shapeways
Choose Your Size
Choose Your Material
Choose your color and finish
Choose Your Size
$33.27
Choose Your Material
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
PRODUCT DESCRIPTIONA Great accessory for the Springer (18" long) pushboat RC model built to about 1/16 scale. Dimensions taken from a real truckable pushboat. (Can be used on other boats as well.)
This is a set of four H-Bitts, usually mounted two per side.
The posts are 2.235 inches (56.77mm) high and 1.788 inches (45.42mm) wide (ends of horizontal post).
Mounted on a small sprue, easy to cut apart.
.104 inch (2.642m) holes in bottom of each post to insert (with epoxy) 3/32 inch steel or brass rods long enough to go into the deck for added strength.
Matches Large H-Bitt set - [Select here]
This is a set of four H-Bitts, usually mounted two per side.
The posts are 2.235 inches (56.77mm) high and 1.788 inches (45.42mm) wide (ends of horizontal post).
Mounted on a small sprue, easy to cut apart.
.104 inch (2.642m) holes in bottom of each post to insert (with epoxy) 3/32 inch steel or brass rods long enough to go into the deck for added strength.
Matches Large H-Bitt set - [Select here]
Request a custom order
and get this product personalized just for you
Details
What's in the box:
Springer-H-Bit-Set-small-1@16
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
More From This Shop
$25.27
