Click and drag to rotate
058012-00 Blackfoot ORV Zero Bump-Steer Knuckles 3d printed

Not a Photo

Gray PA12
058012-00 Blackfoot ORV Zero Bump-Steer Knuckles 3d printed
058012-00 Blackfoot ORV Zero Bump-Steer Knuckles 3d printed

Not a Photo

058012-00 Blackfoot ORV Zero Bump-Steer Knuckles

3D printed in nylon 12 material with a matte finish and slightly grainy feel.

Have a question about this product?

contact the designer
You must be logged in and verified to contact the designer.
Product Description
If you do not care for the incredible bump steer on your vintage or re-release Blackfoot, Monster Beetle or Mudblaster, then have we got something for you! Ampro, in keeping in line with the other great 1980's names like Parma and CRP,  has come out with a knuckle that will counter act the front tire rototion using different geometry. This requires no modification to any plastic components to install and is compatible with the stock spindle and ball stud that you remove from your truck to install these knuckles. You will need to remove 2mm per side of the tie rods as well as drilling the shaft bore where the screw pin goes, This is to prevent the knuckle from dragging. We recommend a 3.0mm bit passed repeatedly through the opening. Do not drill the hole for the screw pin as it is desinged to be screwed right in. The stock knuckle was very, very hard and brittle. Though we make no claims that this one is stronger, the nylon used has flex and will still be strong. Please remember, Shapeways has no responisibilty to replace broken parts and you cannot use anything more powerful than a stock motor. Please see the video below before purchase. One order is enough for both sides.

P/N: 058012-00
What's in the box:
058012-00 Blackfoot Zero Camber Knuckles
3.4 x 3.38 x 4.4 cm
Switch to inches
1.34 x 1.33 x 1.73 inches
Switch to cm
Success Rate:
First To try.
What's this?
Mature audiences only.


We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.