Introductory price for a limited time only!
Replace your rear ash tray with something actually usable!
Switches,
USB Chargers, whatever.
Standard 21x37mm (0.83x1.45in) holes for Carling/ARB/Contura/UTV Rocker switches which are industry standard.
As with everything Shapeways sells, electronics are not included.
Drop me a line here or on Instagram (@wizardpc_gct) if you want something custom and I'll let you know what I can do. This came about because someone asked for it!
Installation video coming soon-ish.
Basic instructions (these will make more sense when the ash tray pod is in your hands):
1. Remove the insert from the center console. There are screws in the top and the bottom of the insert.
2. Pop out the OEM ashtray.
3. Insert your USB chargers, switches, or whatever, into the ash tray pod
4. Insert the ash tray pod in to the cutout for the ash tray. The bottom goes in first. Slide it in from the top. Once it seats, then push the top in. You may have to wiggle the top tabs from inside the console to get them to lock in.
5. Wire up your accessories.
6. Test fit the center console insert to make sure you dont need to adjust your spade connectors for clearance. I suggest
right-angle spade connectors to give you a little more room.
7. Test your accessories.
8. Reinstall the center console insert screws.