1:87 - 24" flanged pipe fittings, gate valve 6ea
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$49.21
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
This is a collection of six each four items ..
90° elbows, tees, flange assemblies and gate valves
The flange dia, number and size of bolts means these are all Class 150 pipe
The studs fit the ID of Evergreen #229 9/32" tubing. This is pretty darn close in scale as the tubing would only be 7/16" over the actual 24" pipe diameter if enlarged to full scale. More than "good nuff"
The gate valve has holes for Dritz Quilting Pins (yellow heads) which are about 0.024" dia. These valves need a handwheel 27-30" dia. An O scale railroad brakewheel is approx. 22" dia.
Note: The photo is of a test print I did with some scrap tubing. The rattle can primer I used was tossed after the photo .. the rough surface you see was from the primer and not the print!
90° elbows, tees, flange assemblies and gate valves
The flange dia, number and size of bolts means these are all Class 150 pipe
The studs fit the ID of Evergreen #229 9/32" tubing. This is pretty darn close in scale as the tubing would only be 7/16" over the actual 24" pipe diameter if enlarged to full scale. More than "good nuff"
The gate valve has holes for Dritz Quilting Pins (yellow heads) which are about 0.024" dia. These valves need a handwheel 27-30" dia. An O scale railroad brakewheel is approx. 22" dia.
Note: The photo is of a test print I did with some scrap tubing. The rattle can primer I used was tossed after the photo .. the rough surface you see was from the primer and not the print!
Details
What's in the box:
1:87 - 24" flanged pipe fittings, gate valve 6ea
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
