These were printed in Orange Strong & Flexible Polished Plastic.
TC2, Traffic Cones, 1" Tall, 12 pcs
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$30.10
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
A dozen bright orange cones connected by sprue. Similar to TC1 except that theses have tapered plastic pins attached under base of cone. Pin can be easily cut off. When installed, they are 32” tall at 1:32 scale. They are 24” tall at 1:24 scale. Can be securely mounted to baseboard of magracing or slotracing track. Since cones are dyed bright orange, a white spot may be visible where sprue is cut away from cone base.
Installation Instructions
1. Separate cones from sprue using sharp knife, razor saw, or hacksaw blade.
2. Drill 3/16" hole in baseboard where you want to install the cone.
3. Put a dab of glue in the hole and press pin of cone into hole.
Installation Instructions
1. Separate cones from sprue using sharp knife, razor saw, or hacksaw blade.
2. Drill 3/16" hole in baseboard where you want to install the cone.
3. Put a dab of glue in the hole and press pin of cone into hole.
Details
What's in the box:
TC2 Traffic Cones
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
