3d render showing product detail
1/600 German Pz.Kpfw. T25 Medium Tank x10
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$19.87
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
1/600 Scale WW2 German Army Pz.Kpfw. T25 Medium Tank.
Contains 10 highly detailed tanks.
Contains:
Pz.Kpfw. T25 Medium Tank
The T-25 never left the drawing board in 1941, but it was to be fitted with an eight cylinder engine giving it 450 HP and a top speed of 60km/hr. The Main gun was to be a semiautomatic 7.5cm A18 KwK gun with a "drum auto loader." It was Skoda's proposition for the Panther but the Nazi Party rejected the design, because designs by MAN and DB on the "Panther" were too far along.
Cleaning Information
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.
Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.
Painting tips and preparation
Contains 10 highly detailed tanks.
Contains:
- 10x Pz.Kpfw. T25 Medium Tanks
Pz.Kpfw. T25 Medium Tank
The T-25 never left the drawing board in 1941, but it was to be fitted with an eight cylinder engine giving it 450 HP and a top speed of 60km/hr. The Main gun was to be a semiautomatic 7.5cm A18 KwK gun with a "drum auto loader." It was Skoda's proposition for the Panther but the Nazi Party rejected the design, because designs by MAN and DB on the "Panther" were too far along.
Cleaning Information
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.
Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.
Painting tips and preparation
Details
What's in the box:
600 Pz.Kpfw. T25 X10.stl
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
