- MagCAD Specialized mount for the Hammerhead Karoo 2.
- Attaches to the new range of Specialized stems; Venge, Tarmac SL7 and Future as well as the Roval Alpinist cockpit (see note below).
- Strong, durable mount that holds your Hammerhead device directly in front of your Specialized stem.
- Attaches to the Specialized stem faceplate, 1x additional M4x16mm cap screw and 1x M4 tee nut required.
Mount your Hammerhead Karoo 2 in front of your handlebars with this MagCAD Specialized Mount. The new Specialized stem faceplate comes with a slot in the centre and a retained nut that provides a secure point to attach the mount.
Fitting the MagCAD mount is a simple process. Simply bolt through your Specialized stem faceplate into the retained nut and rotate the mount to your preferred orientation.
The M4 retained nut usually comes with your Specialized stem or OEM Specialized Garmin mount. If you're struggling to source one please get in contact and we can advise further.
To attach your Hammerhead device simply follow the same procedure as with the OEM Hammerhead mount, pulling the device backward onto the mount with a slight twist to centre and locate it. You should here a positive click when the device is attached. We recommend using the tether that's supplied with your Hammerhead device just for extra security.
The below hardware is required and very simple to source locally:
1x M4x16mm Cap Screw
1x M4 Tee Nut
The MagCAD Specialized mounts also attach to the new Roval Alpinist SL Cockpit handlebars which have a thread integrated into them. For the Roval handlebars you will need a longer M4x20mm cap screw to ensure full thread engagement and you dont need the M4 tee nut.
I’m a MEng Aerospace Engineer and former professional cyclist. All the items, including this mount, are ones which I’ve developed and use myself. A hobby which I take too far but want to share with others.
Feel free to get in contact with any questions or feedback. Individual customisation will be considered.
Revision 3 (current) - Tweaks to interface.
Revision 2 - Tweaks to interface.
Revision 1 - Production Issue
This product and/or service is not affiliated with, endorsed by or in any way associated with Hammerhead Navigation, Inc. or its products and services. Hammerhead and their respective logos are trademarks or registered trademarks of Hammerhead Navigation, Inc.