1/96 Flowers Class Large Depth Charge Racks x2
Product Description
1/96 Scale Royal Navy Flowers Class Large Depth Charge Rack x2 (Port & Starboard). Very highly detailed models created from the John Lambert plans in the book Naval Weapons of WW2. These Racks are the larger Racks with storage for extra Depth Charges underneath main Rack. This set does NOT contain the Depth Charges, see My Shop for 1/96 MKVII Depth Charges: http://shpws.me/QtHP
Cleaning Information
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.
Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.
Painting tips and preparation
- 2x Depth Charge Rack (Port & Starboard, Release Lever faces inward on each Rack)
- Highly detailed, modelled from the John Lambert plans.
- Accurate Hex Nuts, L-Bar shape, Runners and release mechanism
Cleaning Information
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.
Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.
Painting tips and preparation
