You must be logged in and verified to contact the designer.
1/96 Scale Allied Twin 20mm Oerlikon Powered MKV Mount Guns x4 set at 25º elevation. Very highly detailed parts modelled and correctly sized using the John Lambert plans and drawings and many reference photographs.
Set contains parts for 4x Guns
Operators Chair, Hex Nuts, Wiring, Rivets, Sighting and Elevation Apparatus
Side panel is included for later models
Guns angled at 25º (other elevations can be requested)
Each Gun contains 5 parts for maximium detail and to minimise contact with support material wax
(some easy assembly will be required)
Historial Information The twin MK V and Canadian MK VC mountings were powered by an electro-hydraulic off mounting unit except for in coastal craft where the pump was driven by the main or auxiliary engines and had joystick control with Gyro sights in the later mountings. The gun axes were 13" (33cm) apart.
Cleaning Information Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.
Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended.
Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts. Please take a look at my other items.