3d render showing product detail
1/600 Israeli Namer APC x10
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$23.03
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
1/600 Scale Namer Armored Personel Carrier x10. Contains 10 highly detailed tanks.
Contains:
Namer Armored Personel CarrierNamer (Hebrew: נמ"ר, pronounced [nameʁ]), means "leopard" and also a syllabic abbreviation of "Nagmash" (APC) and "Merkava" is an Israeli armoured personnel carrier based on a Merkava Mark IV tank chassis.[5] Namer was developed by and is being assembled by the Israeli Ordnance Corps. It has entered service in limited numbers with the Israel Defense Forces since the end of 2008. However, as of 2014, still only very limited numbers of Namers were in service with the IDF. Due to budgetary constraints, the introduction of the Namer into the IDF has been slow, leaving the ground forces dependent on the M113 for many years to come.[6]
They are more heavily armored than the Merkava IV tanks. According to the IDF, the Namer is the most heavily armored vehicle in the world of any type.
Cleaning Information
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.
Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.
Painting tips and preparation
Contains:
- 10x Namer Armored Personel Carriers
Namer Armored Personel CarrierNamer (Hebrew: נמ"ר, pronounced [nameʁ]), means "leopard" and also a syllabic abbreviation of "Nagmash" (APC) and "Merkava" is an Israeli armoured personnel carrier based on a Merkava Mark IV tank chassis.[5] Namer was developed by and is being assembled by the Israeli Ordnance Corps. It has entered service in limited numbers with the Israel Defense Forces since the end of 2008. However, as of 2014, still only very limited numbers of Namers were in service with the IDF. Due to budgetary constraints, the introduction of the Namer into the IDF has been slow, leaving the ground forces dependent on the M113 for many years to come.[6]
They are more heavily armored than the Merkava IV tanks. According to the IDF, the Namer is the most heavily armored vehicle in the world of any type.
Cleaning Information
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.
Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.
Painting tips and preparation
Details
What's in the box:
600_Namer x10.stl
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
