Aluminum
Praco-Bolsey blade holder 7/8"
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$86.42
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
Blade holder for Praco and Bolsey flashes conversions. For 7/8" blades. Before use it is recommended to sand the inside for a perfect fit of the blade and the heatsink.
Sometimes an exterior sanding is necessary for a perfect fit.
To sand the stainless steel the best option is a dremel because of the hardness of this material.
You will need to drill the holes for the PEM nut, the front philips screw and enlarge the hole to attach the shroud, just drill and tap.
Only tested in stainless steel.
Sometimes an exterior sanding is necessary for a perfect fit.
To sand the stainless steel the best option is a dremel because of the hardness of this material.
You will need to drill the holes for the PEM nut, the front philips screw and enlarge the hole to attach the shroud, just drill and tap.
Only tested in stainless steel.
Details
What's in the box:
YODA LIGHTSABER BLADE HOLDER
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
