Click and drag to rotate
1/200 Dual Purpose 5.25 Inch Guns 1943 x8 3d printed 3d render showing product detail

DIGITAL PREVIEW
Not a Photo

3d render showing product detail
1/200 Dual Purpose 5.25 Inch Guns 1943 x8 3d printed 3d render showing product detail
1/200 Dual Purpose 5.25 Inch Guns 1943 x8 3d printed 3d render showing product detail

DIGITAL PREVIEW
Not a Photo

1/200 Dual Purpose 5.25 Inch Guns 1943 x8 3d printed 3d render showing product detail
1/200 Dual Purpose 5.25 Inch Guns 1943 x8 3d printed 3d render showing product detail

DIGITAL PREVIEW
Not a Photo

1/200 Dual Purpose 5.25 Inch Guns 1943 x8 3d printed 3d render showing set
1/200 Dual Purpose 5.25 Inch Guns 1943 x8 3d printed 3d render showing set

DIGITAL PREVIEW
Not a Photo

1/200 Dual Purpose 5.25 Inch Guns 1943 x8

Made by
Print With Shapeways
Choose Your Material
$113.07
Choose your color and finish
QTY

Have a question about this product?

contact the designer
You must be logged in and verified to contact the designer.
Product Description
1/200 Scale Dual Purpose 5.25 Inch Guns x8. These are highly detailed parts for anyone wishing to build the HMS Prince of Wales, HMS Anson, HMS Howe or the HMS Duke of York as they have a larger front side ventilation port than the KGV (See My Shop for this set). The 1943 upgrades have extra ventilation on the front and access hatches set in cupolas on the mounting roof.
  • 8x Mountings
  • Highly detailed, accurate replacement parts, modelled from plans and photographic reference.
  • Barrels are printed separately and can be angles as desired
  • details include Hex nuts, open sighting ports, accurate venting and access hatches
  • Note: this set is NOT for the HMS King George V, see My Shop for this set

Cleaning Information
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain.  It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.

Let your parts sit in direct sunlight for a few hours to fully cure the resin.  
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.      

Painting tips and preparation         






 
Details
What's in the box:
200 5.25 Twin RN 1943 Sprue.stl
Dimensions:
10.06 x 7.38 x 4.29 cm
Switch to inches
3.96 x 2.91 x 1.69 inches
Switch to cm
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
Logo

Hello.

We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.